,

,

MAZDA13B INTERCOOLER ENGINE FOR SALE

MAZDA13B INTERCOOLER ENGINE FOR SALE, Mazda’s 13B intercooler engine is indisputably one of the most sensational engines ever created. In this guide, we’ll be exploring everything you could need to know about the JDM legend.

There’s no question that the 13B was at the forefront of Mazda’s rotary loyalty, and we’re going to explore everything you could need to know about the insane powerplant.

Thanks to the rotary’s design, these compact engines can fit into the smallest engine bays and are capable of producing a mighty punch, making them immensely popular with tuners across the globe.

Potentially facing bankruptcy, Mazda took an enormous gamble by launching the first-ever rotary-powered RX to the market in 1978. Since then, it’s gone on to become one of the highest-regarded engine lineups in automotive history.
After reaching America in 1993 under the hood of the jaw-dropping RX-7 FD3S, it was the incredible turbocharged 13B-REW that would become the most sought-after engine in the 13B lineup -immediately overshadowing its predecessors.

MAZDA13B INTERCOOLER ENGINE FOR SALE, Since then, from hot rodders to bikes and even light aircraft – the 13B has found its way into just about anything imaginable.

Despite Mazda opting to cease 13B production in 2012, this hasn’t stopped enthusiasts from continuing to prove what the legendary motor is capable of achieving.
On paper, the 13B is a petrolhead’s dream. Mazda delivered affordability, impressive power, and insane noises into the automotive equivalent of a bikini-clad supermodel to the masses.

MAZDA13B INTERCOOLER ENGINE FOR SALE, Now that the rotary engine has had more than fifty years of revolution, we’re going to take an in-depth look at the ‘BRAP-BRAP’ fire-breather.

Mazda 13B Engine History
Alongside the comparably sensible Miata, Mazda felt they had to add something a little bit crazier into the mix with the RX7 to make it stand out, and with stunning looks and the inclusion of the 13B – it certainly did!

You’d be forgiven for assuming that the initial 13B engine was the predecessor of the 13A, but they bear no real relation.

MAZDA13B INTERCOOLER ENGINE FOR SALE, The 13B bears more similarities to the 12A engine found in the Mazda RX-3. However, the longer 13B benefited from additional displacement from the thicker rotor design, with each chamber displacing 654 ccs, bringing the total capacity to 1,308 ccs (1.3L.)

The success of the impressive 130 horsepower 1,146cc 12A engines was further boosted by Mazda’s ability to provide their customers the privilege of cheaper annual road tax, thanks to the creative possibility of getting the engine under the upper-tier 1.5-liter tax bracket, despite equal performance.

As Mazda built upon the success of the already-popular turbocharged 12A, the game-changing 13B was born. Little did they know at that time, but it would soon become the best-selling rotary engine ever produced.

Here’s where it started.

13B AP
MAZDA13B INTERCOOLER ENGINE FOR SALE, Although many think that the 13B’s origins lie with the RX-7, the far lesser-known Mazda Luce AP (Anti-Pollution) was the first car to take advantage of the first emission-friendly, high-performance 13B in 1973.

The Mazda 13B AP engine can be found in the following cars:

1975-1980 Mazda Cosmo AP
1974-1977 Mazda REPU (Rotary Engine Pickup)
1974-1977 Mazda Parkway
1975-1977 Mazda Roadpacer
1973-1978 Mazda RX-4
1975-1980 Mazda RX-5
13B-RESI
MAZDA13B INTERCOOLER ENGINE FOR SALE, It was the birth of the 13B-RESI (Rotary Engine Super Injection), where the 13B finally got a real opportunity to shine.

The 135-horsepower, 135 lb/ft torque, naturally-aspirated RESI engine featured a two-level intake box, which created a supercharger-style effect, squeezing out additional power by opening and closing intake ports.

Impressively, this multiple-stage intake valve control continued to be implemented through to the final RENESIS engines.

MAZDA13B INTERCOOLER ENGINE FOR SALE, With a 0-50 mph time of 6.3 seconds and improved economy figures over the 12B, the 13B-RESI quickly became the most sought-after rotary engine in the Mazda lineup.

The Mazda 13B-RESI engine can be found in the following cars:

13B-DEI
Next up was the 13B-DEI engine, which arrived with the second-generation FC3S RX-7 in 1986, as Mazda began to cease production of the 12A engines.

Although the 13B-DEI remained naturally-aspirated, it could push out far more power thanks to four-injector electronic fuel injection alongside improved combustion quality with a revised intake.

With this new fuel-injection system, two injectors provide for the lower rev range. The remaining two supply fuel to the upper rev range, which provides improved economy in typical everyday driving situations.

In 1989, a revision of the 13B-DEI came with the new Series 5 FC3S, which featured a higher compression ratio of 9.7:1 and revised rotors alongside further upgrades to the engine management and intake manifold.

The result was a much-improved 160 hp, which was impressive for a naturally aspirated 1.3L engine.

The Mazda 13B-DEI engine can be found in the following cars:

1986-1988 Mazda FC3S S4 RX-7 (146 hp)
1989-1991 Mazda Series 5 FC3S S5 RX-7 (160 hp)
13B-T
The 13B-T was the first real gamechanger. Although the 160 hp DEI engine was impressive, strapping a turbo to the 13B was the answer to rotary enthusiasts’ prayers.

In 1986, the ability to get 185 hp and 183 lb/ft torque from a 1.3L engine would have been unheard of, and the beloved rotary engine would become more popular than ever before.

As the later 9.0:1 compression ratio 13B-T engines found in the Series 5 FC3S RX-7 ‘GTX’ model hit the market in 1989, the mind-blowing power figures further increased – 200 hp alongside 195 lb/ft torque.

Keeping with their dual injector format, they opted for the traditional four-port intake, and tuners would soon realize that the 13B-T engine had incredible tuning potential. Many 13B-T’s were soon to be running more than 250 hp.

The Mazda 13B-T engine can be found in the following cars:

1986-1991 Mazda HC Luce Turbo-II (185 hp)
1986-1988 Mazda FC3S S4 Turbo RX-7 Turbo-II (185 hp)
1989-1991 Mazda FC3S S5 Turbo RX-7 Turbo-II (200 hp)
13B-RE
The 13B-RE engine never made its way into the RX-7’s engine bay in factory form, and this was reserved entirely for the top-of-the-range Series JC Eunos Cosmo model.

Although the Eunos Cosmo was known for featuring the 20B-REW engine, they also offered it with an optional 13B-RE variant, which would eventually outsell its 20B-REW sibling.

The 13B-RE featured the largest side ports of any later model engine, including the 13B-REW, alongside more substantial runners on the intake manifold.

Unlike the sequential turbos found on the later-model 13B-REW, these featured a large (HT-15) turbocharger alongside a smaller (HT-10) companion.

Only 5,000 JC Cosmos were ever sold, making the 13B-RE extremely scarce to come by, despite its desirability.

The Mazda 13B-RE engine can only be found in the following car:

1990-1995 Eunos Cosmo
13B-REW
The 13B-REW certainly needs no introduction!

Despite its fantastic family tree prior, the REW is the holy grail of 13B engines, found in one of the most popular JDM cars of all time – the Mazda RX7 FD3S.

Straight out of the showroom, the lightweight, high-output 13B-REW was capable of a hugely impressive 255 hp, before later versions would go on to provide a whopping 280 hp – in stock form, from a 1.3L engine!

Unlike the previous models with two different size turbos, Mazda went all-out for this engine, with two gigantic Hitachi HT-12’s.
When it came to the powerplant itself, it included hardened apex seals, integrated to handle the higher boost levels, alongside thin cast-iron rotors.

An improved intake and exhaust, lubrication system, a revised engine management system, and ignition timing all help assist the 13B-REW with performing to its full potential.

Models with the 13B-REW
The 13B-REW was an incredible showcase of what the 13B engine was truly capable of. As the engine began to fall into the hands of tuning houses across the world, the four-figure horsepower would soon be established, making it one of the most impressive motors of all time.

The Mazda 13B-REW engine can be found in the following cars:

1992-1995 Mazda RX-7 (255 hp)
1996-1998 Mazda RX-7 (265 hp)
1999-2002 Mazda RX-7 (280 hp)
13B-MSP Renesis
The final engine in the 13B family was also the most advanced, the 13B-MSP (Multi-Side Port) Renesis, which first surfaced in the 2004 Mazda RX-8.

Unsurprisingly by this time, emissions and fuel economy had to be two significant considerations for Mazda, with many manufacturers facing more scrutiny than ever, forcing them to pull the plug on the less efficient engines on the market.

For the Renesis engine, the exhaust ports are located on the side of the housing. The rotors are sealed differently, allowing for more improved power from their original design, alongside reduced fuel consumption and emissions.

Despite being a newer, more advanced engine, the stricter emissions laws and reliability concerns of the rotary motors in daily drivers made for more conservative power output for the final 13B, which is why the REW is typically more desirable.

Unlike the higher-powered REW engines, the various RX-8 models pushed out between 189-238 hp, with 156-163 lb/ft torque.

The Mazda 13B-REW engine can only be found in the following cars:

2003-2011 Mazda RX-8 (189-238 hp)
13B Engine Specs
Manufacturer: Mazda
Production years: 1973-2011
Block material: Aluminum
Engine weight: 330-337 lbs (150-153 kg)
Displacement: 1,308 cc – 1.3L (79.81 cu in)
Engine type: Wankel rotary engine with naturally aspirated and turbocharged versions
Power: 135-280 hp
Torque: 130-231 lb-ft (180-314 Nm)
Oil change intervals: 7.5 months or 7500 miles (12,000km) (whichever comes first)
Compression Ratios:
9.2:1 – 1974-1978 (Naturally Aspirated)
9.4:1 – 1984-1988 (Naturally Aspirated)
9.7:1 – 1989-1992 (Naturally Aspirated)
8.5:1 – 13B-T 1986-1988 (Turbocharged)
9.0:1 – 13B-T 1989-1991 (Turbocharged)
9.0:1 – 13B-REW and 13B-RE (Turbocharged)
How Does A Rotary Work?
The 13B has stood the test of time and is undoubtedly one of the most incredible engines ever built. As it reinvented itself over the years, it eventually evolved into the holy grail of 13B’s – the 13B-REW.

Housed in the Mazda RX-7 FD3S from 1992 through to 2002,

it was the 13B-REW that immediately took the rotary powerplant to the next level.
Mazda continued using the rotary engine in their RX-8 and later featured in 2012 during Mazda2 testing, using the rotary technology as a range extender when combined with an electric setup.

Since then, patent drawings have also surfaced, proving that Mazda is still determined to continue with it, but little is known about their intentions. All we know is that there is a small, hard-working team working at Mazda to ensure that they do their best to keep the rotary dream alive.

13B Engine Pros and Cons
As much as we love the 13B, it’s certainly not without its faults, so you’ll need to decide for yourself whether the pros outweigh the cons.

Pros
High-revving
Impressive tuning potential
Lightweight
Incredibly smooth power delivery
Cons
Potentially abused engines
Reliability issues with tuned/badly maintained engines
Rotary servicing costs
Potential difficulty with sourcing parts
13B Tuning Potential
When it comes to tuning potential, there are few engines capable of rivaling the 13B.

Although the entire 13B range is capable of significant improvements, it’s the 13B-REW, unsurprisingly, that’s the most impressive.

Since rotary engines are known for their impressive upper-rev capabilities,

this is where breathing mods are always essential to reduce backpressure and squeeze out a few extra horses in the process.

Bolt-on Mods
Simple bolt-on mods such as a full turbo-back exhaust,

high-flow cats (HFC),

and downpipes alongside an efficient air filter and intercooler will be a great start to significantly improving the breathability.

ECU Upgrade
Once you’ve got it breathing nicely,

you’ll need to consider an aftermarket ECU to compensate for the altered air/fuel ratio, alongside many other additional benefits.

Many owners have managed to up the stock turbos to 15 psi with ECU tuning and supporting mods such as an uprated fuel pump and larger injectors, providing around 350 hp.

Although that might not sound jaw-dropping, it certainly provides a kick in a lightweight chassis such as the FD3S.

Turbo Upgrades
If 350 hp isn’t enough, it’ll be time to explore turbo upgrades,

where you can go on to achieve up to 450 hp without suffering too much from turbo lag.

Single Turbo
For many enthusiasts, they’ll also opt-out of the twin-sequential turbo setup complications at this point, instead favoring a single turbo.

A single turbo setup will help keep the temperatures down and potentially provide additional power, depending on the configuration.

As always, there’s a potential downside of a single turbo, and that’s likely to be lag.

Some turbos, such as the GT35, can produce 10 psi at around 3,500 rpm, which isn’t that far off the stock setup.

You’ll also eliminate the weird turbo switch-over of the twins in the process.

However, as always, the bigger the turbo, the more significant the lag, so you’ll need to find the perfect balance. You’re also going to need to factor a new manifold into the budget.

13B Common Issues & Reliability
We’ll be honest – we love the 13B to bits, but it doesn’t come without its potential issues, as with all rotary engines.

Typically, 13B’s are capable of being reliable (stop laughing!) as long as they’re serviced and maintained and the correct intervals.

It’s just that the service and maintenance ,

will need to be carried out a lot more frequently than most engines, and your wallet will feel it every damn time.

As much as we’d love to have a rotary daily driver, we couldn’t justify the effort that comes with them.

A rotary in a racecar, on the other hand? Perfect.

Rotary engines, by nature, burn a lot of oil,

For this reason, junkyards are filling up with RX-8’s.

It’s vital to keep a close eye on oil levels and oil pressure in a rotary engine.

Some owners will go as far as to pre-mix oil in with the gas to prolong their spinning dorito ownership with additional lubrication.

THE Rotary engines are also known for getting hot. With the twin-turbochargers often crammed in the bay, things can usually get a little toastier than you’d like,

which is why we believe cooling is essential, and that single turbo setups can be beneficial.

Many 13B owners will change the coolant and thermostat annually using an OEM thermostat to ensure that the temperatures are correctly maintained.

Although it’s one of the most credible engines ever built,

the 13B isn’t going to be the ideal choice for everyone.

and they have the added benefit of sounding far more impressive,

than the likes of some of the equivalent-power JDM legends such as the 2JZ-GTE and RB26DETT.

If you’re lucky enough to get your hands on a 13B,

we would always recommend getting a rebuild and a decent tune to ensure it’s running optimally.

For many hardcore motorsport enthusiasts, the care and attention required by the 13B will be worth the effort. Sure, it’s not the easiest of engines to maintain,

but the rewards are undoubtedly worth it once you’ve got an insane rotary screaming in your ears!